Service manual

CHAS
4-74
4. Check:
•collars
• oil seals
Damage / wear → Replace.
• bearings
Damage / pitting → Replace.
• bushings
Damage / wear → Replace.
5. Check:
• connecting rod
•relay arm
Damage / wear → Replace.
6. Check:
• bearings
• oil seals
Damage / wear → Replace.
• dust seals
Damage / pitting → Replace.
7. Check:
• bushings
Damage / wear → Replace.
• spacers
Damage / scratches → Replace.
EAS00710
CHECKING THE DRIVE CHAIN
1. Measure:
• Measure the dimension between 15-links
on the inner side and outer side of the
roller and calculate the dimension between
pin centers.
• Dimension between pin centers = (Inner
dimension + Outer dimension )/2
• 15-link section of the drive chain
Out of specification → Replace the drive
chain, front drive sprocket and rear drive
sprocket as a set.
15-link drive chain section limit
(maximum)
194.3 mm (6.75 in)
SWINGARM AND DRIVE CHAIN