Service manual

CHAS
4-76
6. Check:
•drive sprocket
• rear wheel sprocket
More than 1 / 4 tooth wear → Replace
the drive chain sprockets as a set.
Bent teeth → Replace the drive chain
sprockets as a set.
Correct
Drive chain roller
Drive chain sprocket
CHECKING THE DRIVE CHAIN SUPPORT
1. Check:
• dive chain support
Limit reaches indicator → Replace.
EAS00711
INSTALLING THE SWINGARM
1. Install:
• bearing
• bushing (swingarm)
• oil seal
(with the swingarm)
N
O
TE:N
O
TE:
• Apply the molybdenum disulfide grease on
the bearing and bushing when installing.
• Install the bearing by pressing it on the side
having the manufacture’s marks or numbers.
• First install the bushing and then the bearing
to a specified depth from inside.
Installed depth of bearings and
bushings
Bearing : 4.5 mm (0.18 in)
Bushing : 4.5 mm (0.18 in)
SWINGARM AND DRIVE CHAIN