Service manual

ENG
5-35
7. Install:
• bolt (right crankcase cover)
• copper washer (oil drain bolt)
• oil drain bolt
• copper washer (coolant drain bolt)
• coolant drain bolt
N
O
TE:N
O
TE:
Tighten the bolts in stage, using a crisscross
pattern.
8. Install:
• kick starter crank
N
O
TE:N
O
TE:
Install the kick starter crank closest to but not
contacting the pillar tube and exhaust pipe
.
9. Install:
• shift pedal
N
O
TE:N
O
TE:
Install the shift pedal with the bottom of the
pedal outer diameter as close to the center
of the engine mounting bolt as possible.
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
KICK STARTER AND SHIFT SHAFT