Service manual

SPEC
2-3
Item Standard Limit
Cylinder
Bore 47.500 ~ 47.514 mm (1.8701 ~ 1.8706 in) 47.6 mm
(1.874 in)
Max. taper limit •
• • 0.05 mm
(0.0020 in)
Max. out-of-round •
• • 0.01 mm
(0.0004 in)
Piston
Piston-to-cylinder clearance 0.040 ~ 0.045 mm (0.0016 ~ 0.0018 in) 0.1 mm
(0.004 in)
Diameter D 47.457 ~ 47.472 mm (1.8684 ~ 1.8690 in) 0.1 mm
(0.004 in)
Height H 20.0 mm (0.79 in) •
• •
Piston pin bore (in the piston)
Diameter 14.004 ~ 14.015 mm (0.5513 ~ 0.5518 in) 14.040 mm
(0.5528 in)
Offset 1.0 mm (0.039 in) •
• •
Offset direction Exhaust side •
• •
Piston pin
Outside diameter 13.996 ~ 14.000 mm (0.5510 ~ 0.5512 in) 13.975 mm
(0.5502 in)
Piston ring
Ring type Plain •
• •
Dimensions (B × T) 0.8 × 2.0 mm (0.032 × 0.079 in) •
• •
End gap (installed) 0.30 ~ 0.45 mm (0.012 ~ 0.018 in) 0.8 mm
(0.032 in)
Ring side clearance 0.030 ~ 0.065 mm (0.001 ~ 0.003 in) 0.1 mm
(0.004 in)
ENGINE SPECIFICATIONS