Service manual

CHK
ADJ
3-12
7. Apply:
• lithium-soap-base grease
On the matching surface on air filter ele-
ment.
8. Install:
• air filter element
• washer
• fitting bolt
N
O
TE:N
O
TE:
• Install the air filter element with its projection
facing upward.
• Make sure the air filter element is properly
installed in the air filter case.
EAS00094
CHECKING THE CARBURETOR JOINT
1. Remove:
•carburetor
Refer to “CARBURETOR” in chapter 7.
2. Check:
• carburetor joint
Cracks / damage → Replace.
Refer to “CARBURETOR” in chapter 7.
3. Install:
• carburetor joint
•carburetor
EAS00096
CHECKING THE HOSES
The following procedure applies to all of the
fuel and vacuum hoses.
1. Check:
•fuel hose
• carburetor breather hose
• over flow hose
Cracks / damage → Replace.
Loose connection → Connect properly.
2 Nm (0.2 m•kg, 1.4 ft•lb)
CLEANING THE AIR FILTER ELEMENT / CHECKING
THE CARBURETOR JOINT / CHECKING THE HOSES