Service manual

CHK
ADJ
3-17
8. Check:
• coolant level
Refer to “CHECKING THE COOLANT
LEVEL”.
N
O
TE:N
O
TE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
EAS00106
CHASSIS
ADJUSTING THE FRONT BRAKE
1. Adjust:
•brake lever position
(distance from the throttle grip to the
brake lever)
a. Loosen the locknut .
b. Turn the adjusting bolt in direction or
until the brake lever is in the desired
position.
c. Tighten the locknut.
CAUTION:
After adjusting the brake lever position,
make sure there is no brake drag.
Standard brake lever position
95 mm (3.74 in)
Extent of adjustment
76 ~ 97 mm (2.99 ~ 3.82 in)
Direction
Brake lever distance is
increased.
Direction
Brake lever distance is
decreased.
Locknut
5 Nm (0.5 m•kg, 3.6 ft•lb)
CHANGING THE COOLANT /
ADJUSTING THE FRONT BRAKE