Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
6-8
6
EAU18852
Cowling C
To remove the cowling
Remove the screws, and then pull the
cowling off as shown.
To install the cowling
Place the cowling in the original posi-
tion, and then install the screws.
EAUM2361
Cowling D
To remove the cowling
1. Remove panel A, cowlings A, B
and C.
2. Remove the screws and the quick
fasteners, and then take the cowl-
ing off.
TIP
The quick fastener is removed by push-
ing the center pin in with a screwdriver,
then pulling the fastener out.
To install the cowling
1. Place the cowling in the original
position, and then install the
screws and the quick fasteners.
TIP
To install the quick fasteners, push the
center pin out so that it will protrude
from the fastener head, insert the fas-
tener into the cowling, and then push
the protruding pin in until it is flush with
the fastener head.
2. Install cowlings C, B, A and panel
A.
EAUM2370
Panel A
To remove the panel
1. Remove the rider seat. (See page
3-10.)
2. Remove the screws, and then take
the panel off.
1. Screw
2. Cowling C
1. Quick fastener
2. Screw
3. Cowling D
U5D7E1E0.book Page 8 Monday, July 13, 2009 11:55 AM