Operation Manual
PRE-OPERATION CHECKS
4-2
4
Throttle grip
• Make sure that operation is smooth.
• Check free play.
• If necessary, have Yamaha dealer make adjustment or lubricate.
6-20
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-31
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
6-29, 6-30
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-21–6-24
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
6-31
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-32
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
6-32
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
3-18
Air intake duct
• Check that the screen is not clogged.
• Clean if necessary.
6-19
ITEM CHECKS PAGE
U4TVE6.book Page 2 Saturday, August 4, 2001 12:14 PM