Service manual

2-5
SPEC
E
MAINTENANCE SPECIFICATIONS
LOWER UNIT
ELECTRICAL
Item Unit
Model
Worldwide Z200NETO LZ200NETO
USA Z200TR LZ200TR
Canada Z200TR —
GEAR BACKLASH
Pinion - forward gear mm (in) 0.25 - 0.46
(0.010 - 0.018)
0.21 - 0.43
(0.008 - 0.017)
Pinion - reverse gear mm (in) 0.74 - 1.29
(0.029 - 0.051)
0.97 - 1.29
(0.038 - 0.051)
Pinion shims mm 0.10, 0.12, 0.15, 0.18, 0.30, 0.40, 0.50
Forward gear shims mm 0.10, 0.12, 0.15, 0.18, 0.30, 0.40, 0.50
Reverse gear shims mm 0.10, 0.12, 0.15, 0.18, 0.30, 0.40, 0.50
Item Unit
Model
Worldwide Z200NETO LZ200NETO
USA Z200TR LZ200TR
Canada Z200TR —
IGNITION SYSTEM
Ignition timing (#1) Degree ATDC 3 - BTDC 17
Fuse 1 V-A 12-80
Fuse 2 V-A 12-30
Fuse 3 V-A 12-20
Control unit (B/O, B/Y, B/L,
B/Br, B/G, B/W – R/Y)
Output peak voltage lower
limit
@ cranking 1 V —
@ cranking 2 V 140
@ 1,500 r/min V 205
@ 3,500 r/min V 220
Pulser coil (W/R, W/Y, W/G,
W/B, W/L, W/Br – B)
Output peak voltage lower
limit
@ cranking 1 V 5.0
@ cranking 2 V 5.0
@ 1,500 r/min V 20
@ 3,500 r/min V 35
* Cranking 1: Open circuit voltage.
Cranking 2: Loaded circuit voltage.