Service manual

2-6
SPEC
E
MAINTENANCE SPECIFICATIONS
IGNITION CONTROL SYSTEM
Crank position sensor (G/L)
Crank-position-sensor-to-
flywheel gap
mm (in) 1.0 ± 0.5 (0.04 ± 0.02)
Output peak voltage lower
limit
@ cranking 1 V 4.5
@ cranking 2 V 4.0
@ 1,500 r/min V 13
@ 3,500 r/min V 20
Engine cooling water
temperature sensor
Resistance (B/Y – B/Y)
@ 5˚C (41˚F) k Ω 128
@ 20˚C (68˚F) k Ω 54 - 69
@ 100˚C (212˚F) k Ω 3.02 - 3.48
Throttle position sensor
Input voltage (O – R) V 4.75 - 5.25
Output voltage (P – O) V 0.50 ± 0.02
Thermo switch (P – B)
OFF → ON ˚C (˚F) 84 - 90 (183 - 194)
ON → OFF ˚C (˚F) 60 - 74 (140 - 165)
FUEL CONTROL SYSTEM
Oxygen density sensor
Heater resistance (R/W – B) Ω 2 - 100
Output voltage (Gy – B/W) V 0.0 - 1.0
Atmospheric pressure sensor
Output voltage (at 101.32 kPa)
(P – B)
V 3.2 - 4.6
Intake air temperature sensor
Resistance (B/Y – B/Y) k Ω 1.5 - 4.0
Injector driver
(O/R – Pu/R, O/B – Pu/B,
O/Y – Pu/Y, O/G – Pu/G,
O/L – Pu/L, O/W – Pu/W)
Output peak voltage lower
limit
@ cranking 1 V 65
@ cranking 2 V 60
@ 1,500 r/min V 65
@ 3,500 r/min V 65
* Cranking 1: Open circuit voltage.
Cranking 2: Loaded circuit voltage.
Item Unit
Model
Worldwide Z200NETO LZ200NETO
USA Z200TR LZ200TR
Canada Z200TR —