Service manual

2-7
SPEC
E
MAINTENANCE SPECIFICATIONS
Fuel pressure sensor
Output voltage (P – B) V 2.8 - 3.2
Water detection switch
Float position a “ON” mm (in) 47
STARTER MOTOR
Type Sliding gear
Output kW 1.4
Cranking time limit Second 30
Brushes
Standard length mm (in) 15.5 (0.61)
Wear limit mm (in) 9.5 (0.37)
Commutator
Standard diameter mm (in) 29.0 (1.14)
Wear limit mm (in) 28.0 (1.10)
Mica
Standard undercut mm (in) 0.5 - 0.8 (0.02 - 0.03)
Wear limit mm (in) 0.2 (0.01)
CHARGING SYSTEM
Rectifier/regulator (R – B)
Output peak voltage lower
limit
@ cranking 1 V —
@ cranking 2 V 7.5
@ 1,500 r/min V 12.7
@ 3,500 r/min V 12.7
Lighting coil (G – G)
Output peak voltage lower
limit
@ cranking 1 V 7.5
@ cranking 2 V 8.0
@ 1,500 r/min V 12
@ 3,500 r/min V 12
* Cranking 1: Open circuit voltage.
Cranking 2: Loaded circuit voltage.
Item Unit
Model
Worldwide Z200NETO LZ200NETO
USA Z200TR LZ200TR
Canada Z200TR —
a