User Manual

Operating panel
The following explains the names and functions of each component on the operating panel.
h
da f g
i j k
b c e
l
a
Mic gain [M] knob
Sets the base level of the mic input.
b
Phantom [48V] button/LED
Switches the phantom power on/off. Hold down the button to toggle between on and off. When the switch is on, DC
+48V phantom power is supplied to the mic connected via XLR to the [MIC IN] jack on the rear panel, and the LED will
light. Turn this on when you are using a condenser mic.
Precautions regarding phantom power
(
Follow the important precautions below, in order to prevent noise and possible damage to this unit or to any external devices.
(
Turn phantom power off when you don’t need it.
(
Leave this switch off when you connect a device that does not support phantom power to the [MIC IN] jack on the rear panel.
(
Do not connect/disconnect a cable to or from the [MIC IN] jack on the rear panel while this switch is on.
(
Before turning the switch on/off, turn the a mic gain [M] knob all the way down and the h mic mute [m] button on.
c
HDMI select [b] button/LED
Switches between [HDMI 1] and [HDMI 2] for HDMI input. The LED of the input you select lights up.
11
Component names and functions > Operating panel