User Manual

(
Headset (with analog connection)
When using a headset that has a TRRS (4-conductor) stereo mini plug, you’ll need an audio cable that
splits off into a mic plug and a headphones plug.
Connecting
(
Use an HDMI cable to connect the [HDMI 1] jack (or the [HDMI 2] jack) of the ZG01 from the HDMI output of
your home gaming device.
(
Use an HDMI cable to connect the [HDMI OUT] jack of the ZG01 to the HDMI input of your monitor/display.
(
Use the USB 2.0 cable (included) to connect the [USB] jack of the ZG01 to the USB port on your computer.
(
Connect the headset (to the [MIC IN] jack and the [HEADPHONE] jack on the front panel).
When using a headset that has a TRRS (4-conductor) stereo mini plug, connect with an audio cable that
splits off into a mic plug and a headphones plug.
NOTE
(
If your computer uses a Type-A USB port, use the included USB 2.0 cable (Type C-Type A) to connect. In this case, you will need to
connect a commercially-available USB power adapter to connect to the [5V DC] jack of the ZG01. (p.9)
(
You will need to install the Yamaha ZG Controller on your computer for this. (p.19)
14
Connections > Basic connections