User Manual

Appendix
About HDMI
The ZG01 supports HDMI signal input of up to 4K/60Hz (for audio: PCM 8 ch., 192 kHz/24-bit).
(
The [HDMI OUT] jack and [USB] jack can be used for outputting livestreaming audio. Configure this in the
“STREAMING OUTPUT MIXER” screen of the “Yamaha ZG Controller” dedicated software. The unit outputs
to the [HDMI] jack by default.
(
The audio that is output to the [HDMI OUT] jack is 2 ch., 48 kHz/24-bit fixed (video signal passes through).
(
To livestream video, connect a video capture device (commercially available) to the [HDMI OUT] jack.
NOTE
(
HDMI signal pass-through does not work when this product is on standby mode.
(
This product does not support ARC/eARC.
(
Use an HDMI cable (19-pin) that features the HDMI logo when connecting to devices. Also, be sure to use the shortest cable possible
to avoid signal degradation.
38
Appendix > About HDMI