User Manual

Rear panel
The following explains the names and functions of each component on the rear panel of this unit.
a b c ed f
a
[5V DC] jack (USB Type-C™)
Connect a USB power adapter (commercially available) here. Use a USB power adapter rated at 5 V DC output (1.5 A
or greater).
To operate using bus power
To use this unit via bus power, connect the b [USB] jack to the USB Type-C port on your computer with the included
USB 2.0 cable (Type-C to Type-C). By doing this, you won’t need a separate USB power adapter.
b
[USB] port (USB Type-C™)
Connect your computer using the USB 2.0 cable (included).
Follow the important precautions below to prevent device malfunctions or loss of data.
NOTICE
(
Do not connect any other devices except for your computer to the [USB] port.
(
Make sure to use the included USB 2.0 cable when connecting to devices.
(
Before inserting or unplugging the USB cable, quit all applications and make sure that no data is being transmitted from
this product.
(
After you unplug the cable, make sure to wait for at least six seconds before plugging the cable in again. Rapidly
plugging in and unplugging the cable may cause a malfunction.
c
[HDMI OUT] jack
Connect your TV or monitor/display using an HDMI cable (commercially available).
d
[HDMI 1] jack,[HDMI 2] jack
Connect a gaming device or computer that supports HDMI output using an HDMI cable (commercially available).
e
[SPEAKER OUT] jack
Connect your powered speakers here (3.5 mm stereo mini-plug).
9
Component names and functions > Rear panel