User Manual

(
USB cable (for connecting the video capture device)
Connecting
(
Use an HDMI cable to connect the [HDMI 1] jack (or the [HDMI 2] jack) of the ZG01 with the HDMI output of
your gaming device.
(
Use an HDMI cable to connect the [HDMI OUT] jack of the ZG01 to the HDMI input of your video capture
device.
(
Use an HDMI cable to connect the HDMI input of your monitor/display to the HDMI OUT jack of your video
capture device.
(
Use a USB cable to connect the USB port of your computer to the video capture device.
(
Use the USB 2.0 cable (included) to connect the [USB] jack of the ZG01 to the USB port on your computer.
(
Connect the mic to the [MIC IN] jack on the rear panel
(
Connect your headphones to the [HEADPHONE] jack.
Protection of copyright
Observe the following precautions when distributing content via livestreaming.
(
Do not use this product for any purpose that may infringe upon the rights of any third party including
copyrights, as established by law in each country or region.
(
Yamaha bears no responsibility for any infringement upon third party rights that may occur as a result of
using this product.
NOTE
(
When connecting a condenser mic, turn on the ZG01 and then hold down the phantom [48V] button to turn the phantom power on.
(p.11)
(
Do not connect anything to the [MIC IN] jack on the front panel when you have already connected a mic to the [MIC IN] jack on the
rear panel. If mics are connected to both jacks, the [MIC IN] jack on the front panel will be given priority.
(
You will need to install the “Yamaha ZG Controller” on your computer for this. (p.19)
(
The audio for livestreaming can be output to the [HDMI OUT] jack and to the [USB] port. Configure the output destination in the
STREAMING OUTPUT MIXER screen of the “Yamaha ZG Controller”. A warning message will appear when output to the [USB] port is
set to “ON”. If this happens, you must carefully read the message and agree.
(
The method shown for connecting to a video capture device is just one example. Read the Owner’s Manual for the product in
question before connecting.
16
Connections > Connection example: scenario #1