Instruction manual

19
Operation Method
Auto Stop Operation
Set time
 The screen displays the window to set operation time or operation stop hour after the set
temperature is determined.
When timer mode is set to ”Time”: operation time can be input.
When timer mode is set to “Clock”: operation stop hour be input.
NOTE) The default setting is “Time”. Refer to Page 37 “Select timer mode”.
Operation time input window
Stop time 30min
Auto-stop OP.
Operation stop hour
input window
Stop time 13:00
Auto-stop OP.
 For the input of operation time, the indication varies as shown below depending on the time
range to be indicated.
Time Range Indication
0minute to 59minutes
0min to 59min
1hour to 99hours59minutes
1h00m to 99h59m
100hours to 999hours
100hr to 999hr
 Turn the jog dial to set the desired time.
OP. time 0min
Auto-stop OP.
℃
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM
 Press the jog dial to determine the time set above.
OP. time 30min
Auto-stop OP.
℃
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM