User's Manual

User’s manual

The LED light base with remote controller:

Press button Function:

When power on ( Batteries powered, USB cable connected to DC 4.5V Power, or

adapter powered), the white light is on. When press the button, the light color is

changed

accordingly:

Flat top for

displaying

Adapter

USB socket

USB calbe

Press button

Remote

controller

Input socket

3xAAA batteries case (Batteries

not included)

Plug

USB plug

PAGE 1
User’s manual The LED light base with remote controller: Flat top for displaying Adapter Press button USB socket USB plug Plug USB calbe Remote controller Input socket 3xAAA batteries case (Batteries not included) Press button Function: When power on ( Batteries powered, USB cable connected to DC 4.5V Power, or adapter powered), the white light is on.
PAGE 2
A. Four colors, keep same lighting; B. Fading Mode, light color changes smoothly; C. Flash Mode, light color changes jumping Remote Function: Electrical insulation piece 1) When use the remote, please pull out the electrical insulation piece. 2) When the base connect on the power, not only it is on “OFF” or “ON” condition, you can switch on or off the base with remote controller. 3) The base is always white on at the beginning when power on.
PAGE 3
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the uses authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.