Installation manual

Electronic Control System: Operation Manual for 6LY3 Series Engines Page 1
Appendix A
User Settings and Factory Settings
•
The user setting allows for reset of the maintenance timer.
•
The factory settings require a password to change.
“Unlocking” the Hot Keys
This is a popular way to expand the use of the i5601E. The default hot keys will remain active but you can select
other data parameters in the various display areas. A right arrow becomes visible over key 5. Pushing that key
then allows for selection of a number of data types in the various boxes.
To unlock the hot keys and allow for additional data selections go to the Main menu as described on pages 1
and 1. Then select HOT KEYS. Exit the menu back to the normal operating screens. You will see a right hand
arrow above key 5 when any key is pressed.
The Right Arrow button allows the choice of an individual gauge. The choices available are shown on page 20.
The choices are presented in alphabetical order.
Example using a quad screen:
Note: Data in NMEA 2000
®


1 2 3 4 5
Hot Keys
1 2 3 4 5
Block Keys
Each button cycles the related block
through the list on the next page.