Operating Guide

17
Output pressure varies hOn/
O switch is in the “OFF” (O)
position.igh and low.
Not enough inlet water
supply.
Turn water on fully. Check
garden hose for kinks, leaks
or blockage.
Pump is sucking air.
Check that hoses and t-
tings are airtight. Turn OFF
machine, and purge
pump by squeezing trigger
gun until a steady ow of
water emerges through the
nozzle
Water inlet lter is clogged.
Remove lter and rinse
with warm water.
Discharge nozzle is
obstructed.
Blow out or remove debris
with a ne needle.
Calcied gun, hose or
power nozzle.
Run distilled vinegar
through detergent tank.
Detergent is not working.
Detergent container is
empty.
Add more detergent.
Detergent bottle or
suction tube not properly
connected.
Check connections.
Detergent is too thick. Dilute detergent.
Filter on detergent suction
tube is clogged.
Run warm water through
lter to remove build-up.
Damaged or clogged deter-
gent suction tube.
Remove obstruction or
replace detergent suction
tube.
Nozzle is in high-pressure
position.
Use low pressure (black)
tip.
Discharge nozzle is
obstructed.
Blow out or remove debris
with a ne needle.
Garden hose connection
leaks.
Loose ttings. Tighten ttings.
Missing / worn rubber
washer.
Insert new washer.
Spray wand, extension, or
nozzle leaks.
Spray nozzle not properly
attached.
Ensure quick-connect
wand is attached securely.
Ensure spray tip is clicked
in securely.
Broken o-ring or plastic
insert.
Call the Toll-Free Hotline.