Use and Care Manual
11
function, press again.
Speed adjustment (See Fig. 7)
Three speed settings allow to be changed with a
touch of the button on the control panel.
1. Press the speed adjustment button and set to
your selected blow speed.
2. If the speed is set to the highest, press the
speed adjust button again and this will reduce
the speed.
3. When adjusting the speed, the LED above the
corresponding buttons will change to dierent
colors. The blue LED indicates the lowest
speed, the white LED indicates the medium
speed, and the green LED indicates the
maximum speed.
NOTE:
This blower has the speed memory
function, with the battery pack was kept in
position. The speed setting of next use
can be kept the same as previous use.
STORING AND MAINTENANCE
WARNING
！
Before performing any repair work, always
remove the battery pack and wait until the motor
has come to a standstill.
1 . Do not spray the blower with water. Ingress
of water may destroy the battery pack and
the electric motor.
2. Clean the blower with a cloth, hand brush,
etc.
3. Keep all nuts, bolts and screws tight to
be sure the equipment is in safe working
condition;
4. Replace worn or damaged parts for safety.
Storage:
1. Clean the exterior of the blower thoroughly
using a soft brush and cloth, Do not use
water, solvents or polishes.
2. Store the machine in a dry place. Do not
place other objects on top of the machine.
Transport
Use the original packaging to ship whenever
possible.