Use and Care Manual

Snow thrower controls and features are described below and

illustrated in Fig. 4-1.

Shift Lever

The shift lever is located on the handle panel and is used to

determine ground speed and direction of travel.

Forward

There are six forward (F) speeds. Position one (1) is the slowest

and position six (6) is the fastest.

Reverse

There are two reverse (R) speeds. One (1) is the slower and two (2)

is the faster.

Skid Shoes

Position the skid shoes based on surface conditions. Adjust

upward for hard-packed snow. Adjust downward when

operating on gravel or crushed rock surfaces.

Augers

When engaged, the augers rotate and draw snow into the auger

housing.

Chute Assembly

Snow drawn into the auger housing is discharged out the chute

assembly.

Headlight (if so equipped)

The headlight is located on top of the handle panel and is

automatically turned on when the engine is started.

Figure 4-1

Skid Shoe

Augers

Auger Control

Chute Directional

Control

Shift Lever

Drive Control

Headlight

Chute Assembly

Clean Out

Tool

Controls and Features