Specifications

Attaching Grasscatcher

• Lift the rear discharge door and remove the rear mulching baffle from the mower. See Figure 7.

Rear Mulching Baffle

FIGURE 7

NOTE: Make sure that the cables are routed to the outside of the handle and out of the way when attaching the

grasscatcher.

• Place the hooks of the grasscatcher into the slots in the handle bracket assemblies on both sides. See

Figure 7. Release the rear discharge door.

• To remove the grasscatcher, lift the rear discharge door on the mower. Lift the grasscatcher up, out of the

slots in the handle bracket assemblies. Reinstall the rear mulching baffle and release the rear discharge

door.

FIGURE 8

NOTE: For instructions on how to bag the grass clippings, please refer to page 12 of this manual.

,_ WARNING: Never operate the mower unless the hooks on the grasscatcher are seated in the

slots on the handle bracket assemblies, and the rear discharge door rests firmly against the

top of the grasscatcher.