Instructions / Assembly

Fasten 2x4x104 just below the 4x4 caps. Be sure both

ends are spaced evenly. Repeat on opposite side.

Mark center of these 2x4's.

Fasten support brackets to one end of the 2x4x51 that

is part of the cover frame pack. Use 1 3/4" washer

screws. Flares should be flush with bottom of 2x4.

There will be two of these brackets and 2x4's.

Place this vertical 2x4 with bracket at location

marked center on step 34. Complete fastening

using 1 3/4" washer screws.

Step 33:

Step 36:

Step 35:

Step 34:

Lunar Vinyl Playset Assembly Manual