Instructions / Assembly

Step 12:

Step 11:

Lift swing beam into position. One person should be up

in the tower. The other person should continue to hold

the end post steady.

Note: Your set may not appear exactly as pictured.

Swing Frame Assembly

Step 9:

Step 10:

Fasten corner brace to swing beam and end post. Be

sure end post is plumb. Attach using six 1 3/4" washer

head screws.

Push bracket against 2x6 vinyl then fasten first with

two lags provided.

Next predrill 7/16" holes and fasten with two 2 3/4"

bolts provided, using acorn nuts and washers.