Instructions / Assembly

4
Lunar Vinyl Playset Assembly Manual
Unpack and identify parts.
Identify and then place two 2x6x 73 1/2" and two
2x6x56" on a smooth, flat surface to begin. Make sure
floor joist hangers are turned
in. Also notice shims at
four corners.
Thread 6 3/8" bolts into T-nuts on four corners.
Fasten four 4x4x54". Pre-drilled hole configuration is
very important on all 4x4's. Hand tighten acorn
nuts at this point. Be sure to always place washer
between vinyl and acorn nut.
Step 1:
Step 4:
Step 3:
Step 2: