Instructions / Assembly

7
Fasten top and bottom flanges of corner bracket using
1 3/4" screws.
Fasten slats to tower using pattern provided to find
proper spacing. Be sure you know where any
components you may have purchased will be attached
prior to fastening slats. Use 1 3/4" screws to fasten slats.
Assembly instructions for components can be found on
pages 21-24.
Prepare to assemble legs by identifying two
2x6x 81 1/2" with long point on one end. Also, one
2x5x79 1/2" with braces attached.
Fasten 2x6x81 1/2(with long point) using 3 1/2"
stainless steel lag screws. Be sure this is flush.
Repeat on opposite side.
Step 13:
Step
16
:
Step 15:
Step 14:
Lunar Vinyl Playset Assembly Manual