Instructions / Assembly

7
Backyard Hideout Assembly Manual
Use six screws on each side. Fasten the cover
starting at one end and keeping roof cover
snug between each screw.
Drape roof cover over the cover frame and
repeat step 19-20 on this side.
Be sure to keep cover pulled tight while
fastening starting at one end.
The assembly of your tower and roof is now
completed.
You are now ready to assemble the swing
beam support frame.
Identify all the parts needed for the
assembly:
• 1 endpost
• 2 braces
• 1 ground runner
Step:23
Step:22
Step: 20
Step:19
Begin fastening roof cover to 2x4x48 roof
mount with 3/4" cover screws. Be sure to
align both ends and approximately 2"
overlap, before fastening.
Step:21