Instructions / Assembly

9
Backyard Hideout Assembly Manual
Identify the swing beam.
Fasten metal plates to swing beam using two
3.5" bolts and nuts.
Be sure hole orientation is as pictured!
Place second plate in position then finger
tighten nuts on bolts.
You are now ready to fasten the swing
beam to the support frame.
Step:33
Step:32
Step:31Step:30
Fasten metal plates to end post using two 3.5"
bolts and nuts.
Step:34
Tighten all four bolts at this point with
wrench or cordless drill.
Step:35
Patiova.com
Info@
Patiova.com
6649 N. Moscow Road Parkesburg, PA 19365 610-857-1359