Specification

11
(62) Fasten to floor, using two 3”
screws at every stud, trying to hit
the floor joists.
(64) Attach bottom edge of siding
to floor, using an 8” to 12” nail
spacing. Do not leave the back
wall standing alone, without
firmly bracing it.
(63) Repeat for the rest of the wall,
again; making sure wall is in
against the floor frame.
(68) Locate and lay out the parts to
assemble the front wall.
(69) Front wall is done much the
same as the back wall except for the
door and window studs. Locate
double studs with dados for the
door, and single studs with dados
for the windows.
(70) Fasten window studs with
dados, to the window blocks, using
two 3” screws. Repeat for all the
window studs.
(65) Locate a rafter to use for brac-
ing. Fasten the bottom, using two
3” screws.
(66) Make sure the wall is level,
then fasten the brace to the wall.
(67) Repeat on opposite end.
[phone] - [e-mail]
Brace Back Wall
Assemble Front Wall Frame