Specification

15
(98) Locate and lay out the gable
siding for the garage door gable,
with overlap towards the front.
(100) Nail siding along top edge,
making sure the siding is parallel
with the center of the double top
plate.
(99) Align siding flush with the
top, and edge of front wall siding,
using 2” siding nails.
(104) Install the final piece, then
move to next step.
(105) Lay out the siding for the op-
posite gable, again; making sure
overlap is towards the front.
(106) Fasten the siding on this ga-
ble, starting on the front side.
(101) Incorrect! Ensure bottom
corner of siding is properly
aligned.
(102) Correct! Attach to wall
studs, using 2” siding nails.
(103) Install the next siding piece.
Note: Do not nail the siding along
the bottom, at the garage door
opening.
[phone] - [e-mail]
Install Gable Wall Siding