Installation & Assembly

4
(1) Place the package as close to
the assembly location as possible.
(3) Remove and organize parts
from package.
(2) Cut package bands.
Note: Floor unit is packaged sepa-
rately.
Unpack The Kit
If You Got A Floor With This Unit,
(Skip Steps 4-9)
(7) After all the walls are set, per-
manently anchor the walls, first; pre
-drilling the holes, using a 1/2” con-
crete bit, (Not provided) then,
moving to next step.
(8) Fasten the walls to the founda-
tion, using 1/2” x 7” galvanized
wedge anchors, (Not provided) and
space them every 4 to 6 feet, or ac-
cording to local code requirements.
(9) Ask your local hardware de-
partment for any additional info on
how to properly install the anchor-
ing system, or refer to the video at
www.youtube.com/watch?
(4) Locate and lay out the 6’ pres-
sure treated 2x4 Sill Plates, cutting
them to length as needed.
NOTE: Perimeter needs to be
square, and exactly 12’x26’
(5) Fasten the sill sealer (Not pro-
vided) to the bottom of the sill
plate. (You will need approxi-
mately 70 feet)
(6) After making sure the sill
plates are in the proper position,
pre drill holes, then fasten to the
foundation, using 3” Tapcon
screws, (Not provided)
[phone] - [e-mail]