Installation Guide
17
Place the Double 2x4 Rafter into the slot at the top
of the Post and align the hole in the Rafter to the
holes in the Brace Section.
Place the Roof Bolt through the predrilled
holes in the Brace Section.
and hand tighten.
Prepare Roof Bolts by putting one (1) Acorn Nut
shown. Do not tighten Nut.
Locate the Double 2x4 Rafters.
Roof Assembly
Install the Rafter directly opposite the previously
installed Rafter, as shown in previous steps.
2x4 Double Raer
Align these two holes
Washer
Nut