Use and Care Manual
YARDGARD SELECT
™
Planning & Purchasing Guide
© 2014 Midwest Air Technologies, Inc • 6700 Wildlife Way. Long Grove, IL 60047 • Customer Service: 800-628-8815
Thank you for your interest in the YARDGARD SELECT
™
Fencing System. Please follow these step-by-step instructions for
proper planning and purchasing.
• A Fence Layout Guide is provided to sketch your fence layout before installation.
• For more information and to view the YARDGARD SELECT
™
installation video, visit homedepot.com, yardgardselect.com or
scan the QR-code found in the upper right corner of this page.
IMPORTANT
AS PART OF THE PLANNING PROCESS...
• Check local codes regarding height, locations, etc. Permits may be necessary.
• Consult plat of survey or professional surveyor to ensure that your fence footings are
located within your property lines.
• Check with local utility company for cables, underground lines, etc. A check list is
provided below for your convenience.
£
Electricity Cable
£
Sprinkler System
£
Gas
£
TV/Internet Cable
£
Sewer Pipe
£
Water
£
Others (List your own check list at the note area below.)
TOOLS AND MATERIALS
Setting Posts
• Post Hole Digger
• Shovel
• Mixing Tub
• Fast Set Concrete -
(1) 50 lb bag per post
• Tape Measure
• String
• Stakes
• Level
Assembling Frame and
Wire Mesh Panels
• Hacksaw or Reciprocating Saw
• Adjustable Wrench
• Channel-Lock Pliers
• 1/8˝ Drill Bit
• Cordless Drill
• 1/4˝ Nut Driver
• Phillips Bit
• Wire Cutter
• Black Spray Paint
Scan to view
installation video