Installation Guide

YARDGARD SELECT
- FENCE FRAMEWORK INSTALLATION INSTRUCTIONS PAGE 1PAGE ii YARDGARD SELECT
- FENCE FRAMEWORK INSTALLATION INSTRUCTIONS
FENCE FRAMEWORK - 4´ x 24´
STAGE 1: PARTS LIST
A B C E
A
D
FENCE FRAMEWORK - 4´ x 24´ (1000-035-156) QTY.
A 6-ft Post 3
B
8ft-ft Rail 3
C
Rail Sleeve 3
D
Panel-to-Post Clip 9
E
Panel-to-Rail Clip 18
---
Self-Tapping Screw 28
STAGE 1: FRAMEWORK INSTALLATION
1
POST HARDWARE KIT
F E
H G
J
I
POST HARDWARE KIT (1000-034-742) QTY.
F Rail Connector 1
G Panel-to-Post Bracket 3
H Tension Band 1
I Tension Wire Ratchet 1
J Post Cap 1
---
Self-Tapping Screw 10
E
Panel-to-Rail Clip 1
TOOLS AND MATERIALS
Setting Posts
• PostHoleDigger
• Shovel
• Mixing Tub
Fast Set Concrete - (1) 50 lb bag per post
Tape Measure
• String
• Stakes
• Level
Assembling Framework
Hacksaw or Reciprocating Saw
• Channel-LockPliers
• 1/8˝DrillBit
• CordlessDrill
• 1/4˝NutDriver
• PhillipsBit
• BlackSprayPaint
CongratulationsonyourpurchaseoftheYARDGARD
SELECT
FencingSystem.Pleasefollowthestep-by-stepinstructions
forproperinstallation.
• Alwayswearsafetygoggleswhenworkingwithmetalswhichcouldpotentiallydamageyoureyesight.Otherbody
protectionssuchaskneepads,workgloves,etc.arealsosuggested.
• UseyourYARDGARD SELECT
Planning&PurchasingGuidetoassistwithyourinstallationprocess.
• Beforeyoubegin,visithomedepot.comoryardgardselect.comtowatchourinstallationvideo.
REMINDER
BEFORE YOU START DIGGING...
• Checklocalcodesregardingheight,locations,etc.Permitsmaybenecessary.
• Consultplatofsurveyorprofessionalsurveyortoensurethatyourfencefootingsarelocatedwithinyourpropertylines.
• Checkwithlocalutilitycompanyforcables,undergroundlines,etc.Achecklistisprovidedbelowforyourconvenience.
£
ElectricityCable
£
SprinklerSystem
£
Gas
£
TV/InternetCable
£
Sewer Pipe
£
Water
£
Others(Listyourownchecklistatthenoteareabelow.)
Setting Posts
• PostHoleDigger
• Shovel
• MixingTub
• FastSetConcrete-
(1) 50 lb bag per post
• TapeMeasure
• String
• Stakes
• Level
GETTING STARTED
TOOLS AND MATERIALS
EachsectionwillhavealistofToolsandMaterialsneededtocompletethejob.Thefollowingisamasterlistofthe
toolsyouwillneedtocompleteallstages ofinstallation.
Assembling Frame and Wire Mesh Panels
Hacksaw or Reciprocating Saw
• AdjustableWrench
• Channel-LockPliers
• 1/8˝DrillBit
• CordlessDrill
• 1/4˝NutDriver
• PhillipsBit
• WireCutter
• BlackSprayPaint
YARDGARD SELECT
- FENCE FRAMEWORK INSTALLATION INSTRUCTIONS