Installation Guide

YARDGARD SELECT
™
- FENCE FRAMEWORK INSTALLATION INSTRUCTIONS PAGE 7PAGE 6 YARDGARD SELECT
™
- FENCE FRAMEWORK INSTALLATION INSTRUCTIONS
TENSION WIRE (1000-034-747)
TENSION WIRE (1000-034-747) QTY.
K
Tension Wire
200´ Roll
1
Panel-to-Wire Clip 100
STAGE 2: FENCE PANEL INSTALLATION
2
FENCE PANELS (1000-034-736)
FENCE PANELS (1000-034-736) QTY.
L 8’ Fence Panel Section 3
M
Panel Clip 12
TOOLS AND MATERIALS
Installing Tension Wire
• TapeMeasure
• Screwdriver(Phillips/Blade)
• AdjustableWrench
• WireCutter
• AdjustablePliers
• CordlessDrill
Installing Fence Panels
• WireCutter
STAGE 2: FENCE PANEL INSTALLATION
2
STEP 1: INSTALLING TENSION WIRE
• Positionthetensionband3˝fromtheground(Fig.12).
• Attachthetensionwireratchet(includedinthePostHardware
Kit)tothetensionbandandtightencarriageboltusingan
adjustablewrench(Fig.12).
• Duplicatethisstepattheoppositecorner,end,orgatepost.
• Measurethedistancebetweenthetwopostsandadd1˝to
thatmeasurement.Cuttensionwiretosize.(Fig.13)
• Threadtensionwirethroughholeinrstratchetandwrapus-
ingadjustablewrenchmaking3to4rotations(Fig.13and14).
• Stretchtensionwiretotensionwireratchetattheoppositeend
ofthefenceline.Repeatthestepsaboveandrotateuntilwire
istight.
• Repeatforeachfenceline.
Fig. 12 Tension Band Installation
Fig. 13 Tension Wire Insertion
Fig. 14 Tighten Tension Wire
STAGE 2: PARTS LIST
3˝
TensionBand
TensionWireRatchet
Insert tension wire
throughholes
AdjustableWrench