Use and Care Manual

ManualsBrandsYARDGARD Select ManualsLumber & Composites4 ft. x 144 ft. Complete Fence Kit

YARDGARD SELECT

™

Planning & Purchasing Guide

Thank you for your interest in the YARDGARD SELECT

™

Fencing System. Please follow these step-by-step instructions for

proper planning and purchasing.

• A Fence Layout Guide is provided to sketch your fence layout before installation.

• For more information and to view the YARDGARD SELECT

™

installation video, visit homedepot.com, yardgardselect.com or

scan the QR-code found in the upper right corner of this page.

IMPORTANT

AS PART OF THE PLANNING PROCESS...

• Check local codes regarding height, locations, etc. Permits may be necessary.

• Consult plat of survey or professional surveyor to ensure that your fence footings are

located within your property lines.

• Check with local utility company for cables, underground lines, etc. A check list is

provided below for your convenience.

Electricity Cable

Sprinkler System

Gas

TV/Internet Cable

Sewer Pipe

Water

Others (List your own check list at the note area below.)

TOOLS AND MATERIALS

Setting Posts

• Post Hole Digger

• Shovel

• Mixing Tub

• Fast Set Concrete -

(1) 50 lb bag per post

• Tape Measure

• String

• Stakes

• Level

Assembling Frame and

Wire Mesh Panels

• Hacksaw or Reciprocating Saw

• Adjustable Wrench

• Channel-Lock Pliers

• 1/8˝ Drill Bit

• Cordless Drill

• 1/4˝ Nut Driver

• Phillips Bit

• Wire Cutter

• Black Spray Paint

Scan to view

installation video

Summary of content (5 pages)

PAGE 1
YARDGARD SELECT™ Planning & Purchasing Guide Scan to view installation video Thank you for your interest in the YARDGARD SELECT™ Fencing System. Please follow these step-by-step instructions for proper planning and purchasing. • A Fence Layout Guide is provided to sketch your fence layout before installation. • For more information and to view the YARDGARD SELECT™ installation video, visit homedepot.com, yardgardselect.com or scan the QR-code found in the upper right corner of this page.
PAGE 2
PLANNING & PURCHASING GUIDE FENCE LAYOUT GUIDE FENCE LAYOUT GUIDE STEPS FOR PLANNING YOUR FENCE INSTALLATION Follow the steps below to successfully plan your YARDGARD SELECT™ installation. Draw your fence layout using the grid below. 1. Measure the length and width of your fence installation, making sure you are at least 4˝ inside of the property line. NOTE: At least 4˝ is required for concrete footings to be placed an adequate distance from an adjacent neighbor’s property. 2.
PAGE 3
MATERIAL PURCHASING WORKSHEET YARDGARD SELECT™ Guía de planificación y compra MATERIAL PURCHASING WORKSHEET Using your Fence Layout Guide: • Calculate the total linear feet for your installation and write here. - __________ • Select the column that corresponds to your total linear feet to determine the number of cartons needed. • Use the Post Hardware Calculator to determine the number of Post Hardware Kits required.
PAGE 4
GUÍA DE PLANIFICACIÓN Y COMPRA GUÍA DE DISPOSICIÓN DE LA VALLA GUÍA DE DISPOSICIÓN DE LA VALLA PASOS PARA PLANIFICAR LA INSTALACIÓN DE SU VALLA Siga los pasos que se indican a continuación para planificar exitosamente la instalación de su YARDGARD SELECT™. Dibuje la disposición de su valla utilizando la cuadrícula que aparece a continuación. 1. Mida la longitud y la anchura de la instalación de su valla, asegurándose de que esté por lo menos 4 pulgadas dentro de la línea de propiedad.
PAGE 5
HOJA DE TRABAJO PARA LA COMPRA DE MATERIALES HOJA DE TRABAJO PARA LA COMPRA DE MATERIALES Uso de su Guía de disposición de la valla: • Calcule los pies lineales totales para su instalación y anótelos aquí. - __________ • Seleccione la columna que corresponda a sus pies lineales totales para determinar el número de cajas que se necesitan. • Use la Calculadora de herrajes de poste para determinar el número de Kits de herrajes de poste que se requieren. PIES LINEALES DE VALLA Núm.