User Manual

 25 [e-mail]
It is important the proper hardware gets placed
in the places shown. Make sure you install the
Wafer Bolt rst and then the wood screws.
A:Attachone(195)ArchBeamFrontinbetween
twoCornerPostAssembliesasshowning.10.2
andattachtoCornerPostAssemblywithone1/4x
4-1/4”WaferBolt(with5/16”atwasher);andone
1/4x3-3/4”WaferBolt(with5/16”atwasherand
1/4”connectornut)perside.(g.10.1)
B:Attachthree#8x3”woodscrews
perside.
C:Repeatfortheoppositeside.
D:Centre(079)ArchBeamCentreoneach(301)
Beam81-1/2”andattachwiththree#10x4”Wood
Screwsperside.(g.10.3)
Step 10: Attach Arch Beam Fronts
2 x (195) Arch Beam Front 38.1 x 241.3 x 3048 mm (2 x 6 x 120”)
1 x (079) Arch Beam Centre 38.1 x 241.3 x 3048 mm (2 x 6 x 120”)
HardwareWood Parts
Fig. 10.2
12 x #8 x 3” Wood Screw
6 x #10 x 4” Wood Screw
4 x 1/4 x 4-1/4” Wafer Bolt (5/16” at washer, 1/4” connector nut)
4 x 1/4 x 3-3/4” Wafer Bolt (5/16” at washer, 1/4” connector nut)
Fig. 10.1
1/4x4-1/4”
WaferBolt
#8x3”
Wood
Screw
Flat
Washer
Cornerof
CornerPost
Assembly
(195)Arch
BeamFront
(195)Arch
BeamFront
Outside
PanelPost
#8x3”
Wood
Screw
1/4x3-3/4”
WaferBolt
(195)Arch
BeamFront
Connector
Nut
Flat
Washer
(079)Arch
BeamCentre
Fig. 10.3
(301)Beam
81-1/2”
(301)Beam
81-1/2”
(068)Beam
81-1/2”
(079)Arch
BeamCentre
#10x4”
WoodScrew
x3perside