Installation Guide

 7 [e-mail]
Step 1: Attach Short Supports
HardwareWood Parts
A:Layone(217)XPanelPostFrontandone(227)XPanelPostBackonedge,sothegroovedsidesfaceeach
other(g1.1).Noticetheholelocationonbothposts.
B:Attachone(214)ShortSupportcenteredonandushtothebottomofeach(217)XPanelPostFrontandone
(215)ShortWideSupportushtothebottomofandcenteredoneach(227)XPanelPostBackusing1(YS3)#8
x21/2”WoodScrewinthetopholeand1(YS4)#8x3”WoodScrewinthemiddleholesand1(YS24)#10x4”
WoodScrewinthebottomholesperboard(g.1.2&1.3).
C: Repeat A and B
4 x #8 x 2 1/2” Wood Screw
2 x Short Support 38.1 x 114.3 x 381 mm
2 x Short Wide Support 38.1 x 184.2 x 406.4
2 x X Panel Post Front 44.5 x 57.2 x 1930.4 mm
2 x X Panel Post Back 44.5 x 57.2 x 1930.4 mm
214
YS3
Fig. 1.1
215
Fig. 1.3
Fig. 1.2
Bottom View
227
214
217
YS4
227
217
Notice hole
locations toward
top of boards
227 217
214
215
YS3
215
217
227
YS24
YS4
4 x #8 x 3” Wood Screw
YS24
4 x #10 x 4” Wood Screw