Instructions / Assembly

 15 [e-mail]
Step 6: Attach Supports
HardwareWood Parts
16 x #8 x 3” Wood Screw
4 x Support 38.1 x 76.2 x 492.1 mm
213
YS4
Fig. 6.1
A:Attachone(213)Supporttighttotheinsideof(217)XPanelPostFrontand(227)XPanelPostBackon
eachsideandushtothetopsof(211)SeatBackand(210)SeatFrontusing4(YS4)#8x3”WoodScrews
perboard(g6.1&6.2).Ensurethewideendof(213)Supportisagainst(211)SeatBack(g.6.2).
Fig. 6.2
B:Centreremaining(213)Supports
overpilotholesin(211)SeatBack
and(210)SeatFrontasshowning.
6.1andattachusing4(YS4)#8x3
WoodScrewsperboard.
217
227
213
210
YS4
211
x4perboard
Tight
Flush
Front View
Tight
Flush