Installation Guide

6
32 x #6 x 1-1/8” Wood Screw
2 x T Base Board (15.9 x 109.6 x 385.8 mm)
2 x Base Board End (15.9 x 103.3 x 385.8 mm)
4 x Inside Wall Assembly (38.1 x 250.8 x 419.1mm)
4 x T&G Base Board (15.9 x 109.6 x 385.8 mm)
Step 1- Attach inside Walls
x 16
Flush, both ends
136
YS27
142
017
143
136
142
A. Attach 1 (142) Base Board End to the ledge of the (017) Inside Wall Assemblies, using 4 (YS27)
#6x1-1/8”woodscrewsasshownbelow.Besureitisushtotheedge.(Fig.1.1and1.2)
B. Attach 2 (143)T&G Base Board to the ledge of the (017) Inside Wall Assemblies, using 4 (YS27)
#6 x 1-1/8” wood screws per board. (Fig. 1.1)
C. Attach 1 (136) T Base Board to the ledge of the (017) Inside Wall Assemblies, using 4 (YS27) #6
x1-1/8”woodscrewsperboard.Besureitisushtotheedge.(Fig.1.1and1.2)
Repeat for 2 assemblies
143
Fig. 1.1
Fig. 1.2
017
017
YS27