Installation Guide

18 [e-mail]
Hardware
Wood Parts
#6 x 30 mm
Trim Screw
(028) Plinth Short
B Assembly
Plinths rest on top of the L Mounts
(027) Plinth Short
A Assembly
Flush to corners
Step 6: Attach Plinths to Corner Post Assembly
Part 1
A: Place one (028) Plinth Short B Assembly with one (027) Plinth Short A Assembly tight to each other and
attach using two #6 x 30 mm Trim Screw at the opposite corners per Plinth. (Fig. 6.1 and 6.2)
Note: Plinths will be attached to four corners.
Fig. 6.1
Fig. 6.2
16 x #6 x 30 mm Trim Screw4 x (027) Plinth Short A Assembly 34.9 x 152.4 x 492.1 mm
4 x (028) Plinth Short B Assembly 34.9 x 152.4 x 492.1 mm