Installation Guide

31 [e-mail]
Beam 20-3/4”
Panel
Post
#8 x 3”
Wood Screw
#8 x 2-1/2”
Wood Screw
Bevelled
End
Cross
Brace
Insert
Flush
Arch Gusset
Right or Left
Note: The bevelled ends on each Arch Gusset should always face away from the wood it is attaching to.
B: Attach one (193) Arch Gusset Right or one (194) Arch Gusset Left to the remaining Panel Posts, ush with
the top of the Cross Brace Insert, using one #8 x 3” Wood Screw and to the (080) Arch Beam Offset with two #8 x
2-1/2” Wood Screws as shown in g. 14.3 and 14.4. Each corner of the assembly should have one Arch Gusset
Right and one Arch Gusset Left.
(193) Arch
Gusset Right
Fig. 14.3
HardwareWood Parts
Fig. 14.4
Panel
Post
Beam
20-3/4”
Step 14: Attach Left and Right Arch Gussets
Part 2
2 x (193) Arch Gusset Right 36 x 127 x 453.2 mm (2 x 5 x 17-27/32”)
2 x (194) Arch Gusset Left 36 x 127 x 453.2 mm (2 x 5 x 17-27/32”)
8 x #8 x 2-1/2” Wood Screw
4 x #8 x 3” Wood Screw
Outside view facing in
Pieces removed for clarity
Cross
Brace
Insert
Panel
Post
Cross
Brace
Insert
(194) Arch
Gusset Left
Beam 20-3/4”
(080) Arch
Beam Offset