Instructions / Assembly

14 [e-mail]
Hardware
Wood Parts
C: Slide one complete Insert in from
the top of the panels and down to the
(185) Horizontal Insert. (g. 3.2)
D: Slide one (185) Horizontal Insert
to the top of the complete Insert. (g.
3.2) Attach with two #8 x 3” Wood
Screws.
Note: Be sure to maintain 16”
measurement between each (185)
Horizontal Insert. (g 3.3)
E: Repeat Steps C and D so there are
four complete Inserts per Panel Post
assembly. The last board should be
a (189) Cross Brace Insert. Attach all
three Horizontal Inserts with two #8 x
3” Wood Screws per insert and attach
Cross Brace Insert with four #8 x 3”
Wood Screws. (g. 3.3)
80 x #8 x 3” Wood Screw
(024)
Engineered
Panel Post
32 x Completed Inserts from Step 2
8 x (189) Cross Brace Insert 38.1 x 76.2 x 409.6 mm (2 x 4 x 91”)
24 x (185) Horizontal Insert 38.1 x 38.1 x 409.6 mm (2 x 2 x 91”)
Fig. 3.3
(185)
Horizontal
Insert
Insert
from top
in between
grooves
(189) Cross
Brace Insert
(185)
Horizontal
Insert
#8 x 3” Wood
Screws x 5
Fig. 3.2
Step 3: Assemble 8 Panels
Part 2
(185)
Horizontal
Insert
Complete
Insert
#8 x 3” Wood
Screws x 5
(025)
Engineered
Panel Corner
Post
(191) Bottom
Brace insert
16”