Instructions / Assembly

15 [e-mail]
Step 4: Attach Panel Posts to Corner Posts
Part 1
A: On Engineered Panel Corner Post,
per assembly, pre-drill two holes from the
inside, at the places shown in g. 4.1 and
4.2. Pre-drill in the centre of the panel
and on a slight angle.
Fig. 4.2
Note: Only pre-drill one post per
assembly
Fig. 4.1
Step * **
pre-drill 3 holes from the centre
on a slight angle
Pre-drill
on a slight
angle
(024)
Engineered
Panel Post
(025)
Engineered
Panel Corner
Post