Instructions / Assembly

29 [e-mail]
8X
12
8X
12
D: Starting at the centre Trellis End Assembly and working outwards attach four Trellis End Assemblies on either
side alternating each Trellis End Assembly so the Trellis Clip is on opposing sides to the assemblies next to it.
(g. 13.5)
Note: The distance between assemblies should be 12” (g. 13.6)
Note: Refer to previous page, g 13.2 and 13.3 for attaching trellis clip.
Step 13: Attach Trellis End Assemblies
Part 2
Hardware
24 x #10 x 4” Wood Screw
16 x #10 x 1-1/4” Pan Screw
Fig. 13.6
Fig. 13.5
Start here and move
outwards on either
side alternating trellis
assemblies so Trellis Clip
varies from side to side.