Installation Guide

15 [e-mail]
Hardware
Wood Parts
D: Slide one complete Insert in from
the top of the panels and down to the
(185) Horizontal Insert. (g. 3.2)
E: Slide one (185) Horizontal Insert to
the top of the complete Insert. (g. 3.2)
Attach with two #8 x 3” Wood Screws.
Note: Be sure to maintain 16”
measurement between each (185)
Horizontal Insert. (g 3.3)
F: Repeat Steps D and E so there are
four complete Inserts per Panel Post
assembly. The last board should be
a (189) Cross Brace Insert. Attach all
three Horizontal Inserts with two #8 x
3” Wood Screws per insert and attach
(189) Cross Brace Insert with four #8 x
3” Wood Screws. (g. 3.3)
80 x #8 x 3” Wood Screw
32 x Completed Inserts from Step 2
8 x (189) Cross Brace Insert 38.1 x 76.2 x 409.6 mm
24 x (185) Horizontal Insert 38.1 x 38.1 x 409.6 mm
Fig. 3.3
Fig. 3.2
Step 3: Assemble 8 Panels
Part 2
16”
Complete
Insert
(185)
Horizontal
Insert
(185)
Horizontal
Insert
(191) Bottom
Brace Insert
(239)
Engineered
Panel Corner
Post Long
(241)
Engineered
Panel Corner
Post Long
(185)
Horizontal
Insert
#8 x 3”
Wood
Screws x 5
#8 x 3”
Wood
Screws x 5
(189) Cross
Brace Insert