Installation Guide

20 [e-mail]
HardwareWood Parts
#6 x 30 mm
Trim Screw
x 2 per board
Flush
(033)
Long Plinth
Assembly
Step 6: Attach Plinths to Corner Post Assembly
Part 2
B: On the outside of the corner post assembly, place two (033) Long Plinth Assembly tight against each other
using 2 #6 x 30 mm Trim Screws per Plinth. Be sure they are ush and tight. (Fig. 6.3 and 6.4)
Fig. 6.3
Fig. 6.4
16 x #6 x 30 mm Trim Screw
8 x (033) Long Plinth Assembly 34.9 x 152.4 x 598.5 mm