Installation Guide

21 [e-mail]
Hardware
Wood Parts
#6 x 30 mm
Trim Screw
x 2 per board
Flush
(032) End
Plinth
Assembly
Note: Loosen screws as
necessary to align all edges.
#6 x 30 mm
Trim Screw
(032) End
Plinth
Assembly
Step 6: Attach Plinths to Corner Post Assembly
Part 3
C: Place one (032) End Plinth Assembly onto each Corner Post Assembly. Line them up with previously placed
Plinths. Make sure they are ush and tight to each other and then fasten with two #6 x 30 mm Trim Screw per
end. (Fig. 6.5 and 6.6)
Fig. 6.5
Fig. 6.6
16 x #6 x 30 mm Trim Screw8 x (032) End Plinth Assembly 34.9 x 152.4 x 141.3 mm