Installation Guide

30 [e-mail]
Step 10a
5/16 x 6" Hex Bolt
Remove Hex Blt, Lk Washer, Flat Washer from Step 6
(Leave T-Nut Installed)
A: Leaving the T-nut installed, remove the 5/16 x 6”
Hex Bolt (5/16” lock washer and 5/16” at washer) from
each Beam End Assembly installed in Step 9. (g. 13.1
& 13.2)
Step 13: Attach Support Beams
Part 1
Fig. 13.2
Fig. 13.1
5/16 x 6” Hex Bolt
(lock washer and
at washer)
Beam End
Assembly
(234) Beam
105 1/2”